BY ACHIEVING THE JUNIPER JN0-683 YOU WILL GET THE JOB

By Achieving the Juniper JN0-683 You will Get the Job

By Achieving the Juniper JN0-683 You will Get the Job

Blog Article

Tags: Valid JN0-683 Exam Sample, JN0-683 Materials, Reliable JN0-683 Test Testking, JN0-683 Valid Test Tips, Online JN0-683 Training Materials

If you buy the JN0-683 study materials online, you may concern the safety of your money. If you do have the concern, you can just choose us. We use the international recognition third party for the payment. It will ensure the safety of your money. We are pass guaranteed if you buy JN0-683 Exam Dumps of us, we also money back guarantee if you fail to pass the exam. If you find that your rights haven’t got enough guaranteed, you can ask for refund, and the third party will protect your interests.

Juniper JN0-683 Exam Syllabus Topics:

TopicDetails
Topic 1
  • Data Center Multitenancy and Security: This section tests knowledge of single-tenant and multitenant data center setups. Candidates such as Data Center Professionals are evaluated on ensuring tenant traffic isolation at both Layer 2 and Layer 3 levels in shared infrastructure environments.
Topic 2
  • EVPN-VXLAN Signaling: This section assesses an understanding of Ethernet VPN (EVPN) concepts, including route types, multicast handling, and Multiprotocol BGP (MBGP). It also covers EVPN architectures like CRB and ERB, MAC learning, and symmetric routing.
Topic 3
  • VXLAN: This part requires knowledge of VXLAN, particularly how the control plane manages communication between devices, while the data plane handles traffic flow. Demonstrate knowledge of how to configure, Monitor, or Troubleshoot VXLAN.
Topic 4
  • Data Center Deployment and Management: This section assesses the expertise of data center networking professionals like architects and engineers, focusing on key deployment concepts. Topics include Zero-touch provisioning (ZTP), which automates device setup in data centers without manual input.

>> Valid JN0-683 Exam Sample <<

100% Pass Juniper - JN0-683 Fantastic Valid Exam Sample

Most people define JN0-683 study tool as regular books and imagine that the more you buy, the higher your grade may be. It is true this kind of view make sense to some extent. However, our JN0-683 real questions are high efficient priced with reasonable amount, acceptable to exam candidates around the world. Our JN0-683 practice materials comprise of a number of academic questions for your practice, which are interlinked and helpful for your exam. Just hold the supposition that you may fail the exam even by the help of our JN0-683 Study Tool, we can give full refund back or switch other versions for you to relieve you of any kind of losses. What is more, we offer supplementary content like updates for one year after your purchase.

Juniper Data Center, Professional (JNCIP-DC) Sample Questions (Q51-Q56):

NEW QUESTION # 51
Exhibit.

You have implemented an EVPN-VXLAN data center. Device served must be able to communicate with device server2.
Referring to the exhibit, which two statements are correct? (Choose two.)

  • A. An IRB Interface must be configured on leaf1 and Ieaf2.
  • B. Traffic from server! to server2 will transit the VXLAN tunnel between leaf1 and Ieaf2.
  • C. An IRB interface must be configured on spine1and spine2.
  • D. Traffic from server1 to server2 will transit a VXLAN tunnel to spinel or spine2. then a VXLAN tunnel from spinel or spine2 to Ieaf2.

Answer: C,D


NEW QUESTION # 52
Exhibit.

Connections between hosts connected to Leaf-1 and Leaf-2 are not working correctly.

  • A. Configure the setswitch-options route-distinguisher i92.168.100.50:i parameter on Leaf-1.
  • B. Configure the setswitch-options vtep-source-interface irb.0parameter on Leaf-1.
  • C. Configure the setswitch-options service-id 1 parameter on Leaf-2.
  • D. Referring to the exhibit, which two configuration changes are required to solve the problem? (Choose two.)
  • E. Configure the set switch-options vrf-target target:65000:l parameteron Leaf-2.

Answer: C,E

Explanation:
* Issue Analysis:
* The problem in the exhibit suggests a mismatch in configuration parameters between Leaf-1 and Leaf-2, leading to communication issues between hosts connected to these leaf devices.
* Configuration Mismatches:
* Service-ID:Leaf-1 has service-id 1 configured, while Leaf-2 does not have this parameter. For consistency and proper operation, the service-id should be the same across both leaf devices.
* VRF Target:Leaf-1 is configured with vrf-target target:65000:1, while Leaf-2 is configured with vrf-target target:65000:2. To allow proper VRF import/export between the two leafs, these should match.
* Corrective Actions:
* C. Configure the set switch-options vrf-target target:65000:1 parameter on Leaf-2:This aligns the VRF targets between the two leaf devices, ensuring they can correctly import and export routes.
* E. Configure the set switch-options service-id 1 parameter on Leaf-2:This ensures that both Leaf-1 and Leaf-2 use the same service ID, which is necessary for consistency in the EVPN- VXLAN setup.
Data Center References:
* Correct configuration of VRF targets and service IDs is critical in EVPN-VXLAN setups to ensure that routes and services are correctly shared and recognized between different devices in the network fabric.


NEW QUESTION # 53
Exhibit.

A VXLAN tunnel has been created between leaf1 and Ieaf2 in your data center. Referring to the exhibit, which statement is correct?

  • A. Traffic sent from server1 to server2 will be tagged with VLAN ID 100 on Ieaf2 and forwarded to server2.
  • B. Traffic sent from server1 to server2 will be tagged with VLAN ID 200 on Ieaf2 and forwarded to server2.
  • C. Traffic sent from server1 to server2 will be dropped on leaf1.
  • D. Traffic sent from server1 to server2 will be dropped on Ieaf2.

Answer: C


NEW QUESTION # 54
You are deploying an EVPN-VXLAN overlay. You must ensure that Layer 3 routing happens on the spine devices. In this scenario, which deployment architecture should you use?

  • A. CRB
  • B. distributed symmetric routing
  • C. ERB
  • D. bridged overlay

Answer: A

Explanation:
* Understanding EVPN-VXLAN Architectures:
* EVPN-VXLAN overlays allow for scalable Layer 2 and Layer 3 services in modern data centers.
* CRB (Centralized Routing and Bridging):In this architecture, the Layer 3 routing is centralized on spine devices, while the leaf devices focus on Layer 2 switching and VXLAN tunneling. This setup is optimal when the goal is to centralize routing for ease of management and to avoid complex routing at the leaf level.
* ERB (Edge Routing and Bridging):This architecture places routing functions on the leaf devices, making it a distributed model where each leaf handles routing for its connected hosts.
* Architecture Choice for Spine Routing:
* Given the requirement to ensure Layer 3 routing happens on the spine devices, theCRB (Centralized Routing and Bridging)architecture is the correct choice. This configuration offloads routing tasks to the spine, centralizing control and potentially simplifying the overall design.
* Explanation:
* With CRB, the spine devices perform all routing between VXLAN segments. Leaf switches handle local switching and VXLAN encapsulation, but routing decisions are centralized at the spine level.
* This model is particularly advantageous in scenarios where centralized management and routing control are desired, reducing the complexity and configuration burden on the leaf switches.
Data Center References:
* The CRB architecture is commonly used in data centers where centralized control and simplified management are key design considerations. It allows the spines to act as the primary routing engines, ensuring that routing is handled in a consistent and scalable manner across the fabric.


NEW QUESTION # 55
You are using E8GP peering in an underlay IP fabric. Which two statements are correct in this scenario?
(Choose two.)

  • A. EBGP peering requires an IGP protocol tor adjacency establishment.
  • B. EBGP peering does not require an IGP protocol tor adjacency establishment.
  • C. Every leaf node has a peering session to every other leaf node.
  • D. Every leaf node has one peering session to every spine node.

Answer: B,D

Explanation:
* Understanding EBGP in an IP Fabric:
* EBGP (External Border Gateway Protocol) is commonly used in IP fabrics to establish peering between routers, such as leaf and spine nodes, without relying on an Interior Gateway Protocol (IGP) like OSPF or IS-IS.
* IGP Requirement for EBGP:
* Option B:EBGP peering does not require an IGP for adjacency establishment. This is because EBGP peers are typically directly connected, and BGP establishes its own sessions without needing an underlying IGP.
* Leaf-to-Spine Peering:
* Option C:In a typical IP fabric, each leaf node establishes an EBGP session with every spine node. This ensures full connectivity between leaves and spines, facilitating efficient routing and forwarding within the fabric.
Conclusion:
* Option B:Correct-EBGP does not require an IGP for establishing peering sessions.
* Option C:Correct-Each leaf node peers with every spine node, which is a standard practice in IP fabrics to ensure connectivity and redundancy.


NEW QUESTION # 56
......

These Juniper JN0-683 practice tests simulate the real Data Center, Professional (JNCIP-DC) (JN0-683) exam pattern, track your progress, and help you overcome mistakes. Our Data Center, Professional (JNCIP-DC) (JN0-683) desktop software is compatible with Windows. Whereas, the web-based Juniper JN0-683 Practice Exam works online on iOS, Linux, Android, Windows, and Mac. Additionally, the web-based Data Center, Professional (JNCIP-DC) (JN0-683) practice exam is also compatible with MS Edge, Internet Explorer, Opera, Firefox, Safari, and Chrome.

JN0-683 Materials: https://www.realexamfree.com/JN0-683-real-exam-dumps.html

Report this page